Optical Emission and Laser Spectroscopy in Studies of Sputtering: Actual Research Activities and Recent Achievements

Laser Spectroscopy has been developed into a powerful tool for the detection and energy analysis of neutral particles. Laser Induced Fluorescence Spectroscopy (LIF) has yielded a wealth of information about sputtered neutral particles. In addition, Laser Ionization Spectroscopy has recently offered an increased detection sensitivity. In this paper a summary of recent results is given. By combining LIF with other methods capable of measuring densities and energy distributions of sputtered excited atoms in short lived states, new information about sputtering and excitation mechanisms have been recently obtained and will be summarized here

GROUND-STATE AND EXCITED ATOM EMISSION UNDER ION AND ELECTRON BOMBARDMENT OF NaCI AND CaF2

The particle emission process for ion bombardment and electron bombardment of NaCl and CaF2 using high resolution optical spectroscopy and Laser Induced Fluorescence (LIF) has been compared. The energy distribution of ground-state as well as excited Na atoms from NaCl under electron bombardment was found to be thermal, while under ion bombardment the excited Na atoms were found to be energetic in the range of 2 eV. However for ground-state Na atoms even under heavy ion bombardment (Xe) the energy distribution was found, surprisingly, to be almost purely thermal. In the case of Ca from CaF2 we observed under ion bombardment a non-thermal energy distribution for Ca ground-state atoms at low temperat- ures, but at higher temperatures (above 600 K) a thermal, ion beam induced component became dominant. Similar under electron bombardment only desorption of Ca ground state atoms at elevated temperatures was observed and the energy distribution was purely thermal. In addition no electron induced desorption of Ca was observed for all energies and all temperatures, while under ion bombardment non-thermal emission of Ca was found

Selective cell response on natural polymer bio-interfaces textured by femtosecond laser

This study reports on the evaluation of laser processed natural polymer-chitosan, which is under consideration as a biointerface used for temporary applications as skin and cartilage substitutes. It is employed for tissue engineering purposes, since it possesses a significant degree of biocompatibility and biodegradability. Chitosan-based thin films were processed by femtosecond laser radiation to enhance the surface properties of the material. Various geometry patterns were produced on polymer surfaces and employed to examine cellular adhesion and orientation. The topography of the modified zones was observed using scanning electron microscopy and confocal microscopy. Test of the material cytotoxicity was performed by evaluating the life/dead cell correlation. The obtained results showed that texturing with femtosecond laser pulses is appropriate method to initiate a predefined cellular response. Formation of surface modifications in the form of foams with an expansion of the material was created under laser irradiation with a number of applied laser pulses from N = 1-5. It is shown that irradiation with N > 5 results in disturbance of microfoam. Material characterization reveals a decrease in water contact angle values after laser irradiation of chitosan films. Consequently, changes in surface roughness of chitosan thin-film surface result in its functionalization. Cultivation of MC3T3 and ATMSC cells show cell orientational migration concerning different surface patterning. The influence of various pulse durations (varying from tau = 30-500 fs) over biofilms surface was examined regarding the evolution of surface morphology. The goal of this study was to define the optimal laser conditions (laser energy, number of applied pulses, and pulse duration) to alter surface wettability properties and porosity to improve material performance. The acquired set of results indicate the way to tune the surface properties to optimize cell-interface interaction

Improving osteoblasts cells proliferation via femtosecond laser surface modification of 3D-printed poly-ε-caprolactone scaffolds for bone tissue engineering applications

Synthetic polymer biomaterials incorporating cells are a promising technique for treatment of orthopedic injuries. To enhance the integration of biomaterials into the human body, additional functionalization of the scaffold surface should be carried out that would assist one in mimicking the natural cellular environment. In this study, we examined poly-epsilon-caprolactone (PCL) fiber matrices in view of optimizing the porous properties of the constructs. Altering the porosity of a PCL scaffold is expected to improve the material's biocompatibility, thus influencing its osteoconductivity and osteointegration. We produced 3D poly-epsilon-caprolactone (PCL) matrices by a fused deposition modeling method for bone and cartilage tissue engineering and performed femtosecond (fs) laser modification experiments to improve the surface properties of the PCL construct. Femtosecond laser processing is one of the useful tools for creating a vast diversity of surface patterns with reproducibility and precision. The processed surface of the PCL matrix was examined to follow the effect of the laser parameters, namely the laser pulse energy and repetition rate and the number (N) of applied pulses. The modified zones were characterized by scanning electron microscopy (SEM), confocal microscopy, X-ray computed tomography and contact angle measurements. The results obtained demonstrated changes in the morphology of the processed surface. A decrease in the water contact angle was also seen after fs laser processing of fiber meshes. Our work demonstrated that a precise control of material surface properties could be achieved by applying a different number of laser pulses at various laser fluence values. We concluded that the structural features of the matrix remain unaffected and can be successfully modified through laser postmodification. The cells tests indicated that the micro-modifications created induced MG63 and MC3T3 osteoblast cellular orientation. The analysis of the MG63 and MC3T3 osteoblast attachment suggested regulation of cells volume migration

On the missing single collision peak in low energy heavy ion scattering

We present experimental and simulation data on the oblique angle scattering of heavy Sn ions at 14 keV energy from a Mo surface. The simulations are performed with the binary collision approximation codes TRIM, TRIDYN, TRI3DYN, SDTrimSP, and IMSIL. Additional simulations were performed in the molecular dynamics framework with LAMMPS. Our key finding is the absence of an expected peak in the experimental energy spectrum of backscattered Sn ions associated with the pure single collision regime. In sharp contrast to this, however, all simulation codes we applied do show a prominent single collision signature both in the energy spectrum and in the angular scatter pattern. We discuss the possible origin of this important discrepancy and show in the process, that widely used binary collision approximation codes may contain hidden parameters important to know and to understand.</p